Welcome to SDR Garage Forums
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
![Photo](http://www.mestiso.net/forums/uploads/profile/photo-thumb-645.jpg?_r=0)
ECU Codes
Started by Just Droo, Apr 14 2008 05:02 PM
#1
Posted 14 April 2008 - 05:02 PM
![](http://www.mestiso.net/forums/public/style_images/Carbon_orange/post_offline.png)
So, I pulled codes off my ECU again today and got a few different issues to iron out. Codes started out with:
14 - Vehicle Speed Snesor
77 - Rear heated oxygen sensor circuit
75 -
93 -
121 - Shift solenoid valve B
This may have been a bad source for info but I went to Autozone.com to get some help defining the codes. I can't find a code 75 or 93. I double checked the read out, and maybe I can't count or something. Any thoughts?
Just Droo - '95 Zenki S14
#2
Posted 14 April 2008 - 06:05 PM
![](http://www.mestiso.net/forums/public/style_images/Carbon_orange/post_offline.png)
THis should help!
and also code 93 is still a mystery but it may be the "Vent control valve"
*LED ECU Codes*
11 Crank angle sensor/circuit (1988 to 1990); Crankshaft position sensor (1991 to 1996)
12 Air flow Meter/circuit open or shorted
13 Cylinder head temperature sensor(Maxima and 300ZX models); all others coolant temperature sensor circuit
14 Vehicle Speed Sensor signal circuit is open
15 Mixture ratio is too lean despite feedback control; fuel injector clogged
21 Ignition signal in the primary circuit is not being entered to the ECU during cranking or tuning
22 Fuel pump circuit (Maxima and 1987 and later 300ZX models); all others idle speed control valve or circuit
23 Idle switch (throttle valve switch) signal circuit open
24 Park/netural switch malfunctioning
25 Idle speed control valve circuit is open or shorted
26 Turbo boost
28 Cooling fan
29 Fuel system rich
31 1984 through 1986 EFI models; Problem in air conditioning system; all other models: ECU internal problem
32 1984 through 1986 EFI models; check starter system. All other models: EGR malfuntion (California models)
33 Oxygen sensor or circuit (300ZX left side) - all other models EGR malfunction
34 Detonation (Knock) sensor
35 Exhaust gas temperature sensor (California models)
36 EGR transducer
37 Closed loop control/front oxygen sensor (Maxima)
41 Maxima and 1984 through 1987 300ZX models; fuel temp sensor circuit. All other models: air temperature sensor circuit
42 1988 and later 300ZX models; fuel temperature sensor circuit; all other models: throttle sensor circuit
43 The mixture ratio is too lean despite feedback control; fuel injector clogged (1987 Sentra only): All others; Throttle position sensor circuit is open or shorted
44 No trouble codes stored in ECU
45 Injector fuel leak (California models only)
51 Fuel injector circuit open (California models only)
53 Oxygen sensor (300ZX right side)
54 Short between automatic transmission control unit(TCU) and ECU
55 Normal engine management system operation is indicated
63 Misfire detected - cylinder no. 6
64 Misfire detected - cylinder no. 5
65 Misfire detected - cylinder no. 4
66 Misfire detected - cylinder no. 3
67 Misfire detected - cylinder no. 2
68 Misfire detected - cylinder no. 1
71 Misfire detected - random
72 Catalytic converter malfunction (right side)
74 EVAP pressure sensor
75 EVAP leak
76 Fuel injection system
77 Rear oxygen sensor
81 Vacuum cut bypass valve
82 Crankshaft sensor
84 Automatic trans-to-fuel injection communication
85 VTC solenoid
87 EVAP canister purge control
91 Front oxygen sensor
95 Crankshaft sensor
98 Coolant temperature sensor
101 Camshaft sensor
103 Park/neutral switch
105 EGR and canister control valve
108 EVAP volume control
*PO Scan Tool codes below*
0505 No self diagnostic codes present
0101 Camshaft position sensor
0102 Mass airflow sensor/circuit
0103 Coolant temperature sensor
0104 Vehicle speed sensor
0111 EVAP purge flow monitoring system
0114 Fuel system rich
0115 Fuel system lean
0201 Ignition signal
0203 Closed throttle switch
0205 IACV/AAC valve
0208 Overheating
0213 EVAP system
0214 Purge volume control valve
0301 ECM control unit
0302 EGR function
0303 Front heated oxygen sensor malfunction
0304 Knock sensor
0305 Exhaust gas temperature sensor
0306 EGRC BPT valve
0307 Closed loop operation
0309 Vent control valve
0311 Vacuum cut valve bypass valve
0312 EVAP system purge control valve
0401 Intake air temperature sensor
0402 Fuel temperature sensor or circuit
0403 Throttle position sensor
0409 Front oxygen sensor
0410 Front oxygen sensor
0411 Front oxygen sensor
0412 Front oxygen sensor
0503 Front oxygen sensor
0510 Rear oxygen sensor
0511 Rear oxygen sensor
0512 Rear oxygen sensor
0514 EGR system
0605 Cylinder 4 misfire
0606 Cylinder 3 misfire
0607 Cylinder 2 misfire
0608 Cylinder 1 misfire
0701 Multiple cylinder misfire
0702 Catalytic converter
0704 EVAP system
0705 EVAP system
0706 Fuel injection system malfunction
0707 Rear oxygen sensor
0801 Vacuum cut valve bypass valve or circuit
0802 Crankshaft sensor
0803 Absolute pressure sensor
0804 A/T diagnosis comm line
0807 EVAP canister purge control
0901 Front oxygen sensor heater
0902 Rear oxygen sensor heater
0903 Vent control valve
0905 Crankshaft position sensor
0908 Coolant temperature sensor
1003 Park/neutral switch
1005 EGR solenoid valve circuit
1008 EVAP system
1101 Inhibitor switch
1102 A/T vehicle speed sensor
1103 A/T first signal
1104 A/T second signal
1105 A/T third signal
1106 A/T fourth signal
1107 A/T torque converter clutch
1108 Shift solenoid A
1201 Shift solenoid B
1203 Overrun clutch solenoid
1204 TCC solenoid
1205 Line pressure solenoid
1206 TPS for A/T
1207 Speed signal A/T
1208 A/T fluid temperature sensor
1302 MAP/BAR switch solenoid valve or circuit
1305 Fuel pump control module or circuit
1308 Cooling fan
![thumbsup.gif](style_emoticons/default/thumbsup.gif)
*LED ECU Codes*
11 Crank angle sensor/circuit (1988 to 1990); Crankshaft position sensor (1991 to 1996)
12 Air flow Meter/circuit open or shorted
13 Cylinder head temperature sensor(Maxima and 300ZX models); all others coolant temperature sensor circuit
14 Vehicle Speed Sensor signal circuit is open
15 Mixture ratio is too lean despite feedback control; fuel injector clogged
21 Ignition signal in the primary circuit is not being entered to the ECU during cranking or tuning
22 Fuel pump circuit (Maxima and 1987 and later 300ZX models); all others idle speed control valve or circuit
23 Idle switch (throttle valve switch) signal circuit open
24 Park/netural switch malfunctioning
25 Idle speed control valve circuit is open or shorted
26 Turbo boost
28 Cooling fan
29 Fuel system rich
31 1984 through 1986 EFI models; Problem in air conditioning system; all other models: ECU internal problem
32 1984 through 1986 EFI models; check starter system. All other models: EGR malfuntion (California models)
33 Oxygen sensor or circuit (300ZX left side) - all other models EGR malfunction
34 Detonation (Knock) sensor
35 Exhaust gas temperature sensor (California models)
36 EGR transducer
37 Closed loop control/front oxygen sensor (Maxima)
41 Maxima and 1984 through 1987 300ZX models; fuel temp sensor circuit. All other models: air temperature sensor circuit
42 1988 and later 300ZX models; fuel temperature sensor circuit; all other models: throttle sensor circuit
43 The mixture ratio is too lean despite feedback control; fuel injector clogged (1987 Sentra only): All others; Throttle position sensor circuit is open or shorted
44 No trouble codes stored in ECU
45 Injector fuel leak (California models only)
51 Fuel injector circuit open (California models only)
53 Oxygen sensor (300ZX right side)
54 Short between automatic transmission control unit(TCU) and ECU
55 Normal engine management system operation is indicated
63 Misfire detected - cylinder no. 6
64 Misfire detected - cylinder no. 5
65 Misfire detected - cylinder no. 4
66 Misfire detected - cylinder no. 3
67 Misfire detected - cylinder no. 2
68 Misfire detected - cylinder no. 1
71 Misfire detected - random
72 Catalytic converter malfunction (right side)
74 EVAP pressure sensor
75 EVAP leak
76 Fuel injection system
77 Rear oxygen sensor
81 Vacuum cut bypass valve
82 Crankshaft sensor
84 Automatic trans-to-fuel injection communication
85 VTC solenoid
87 EVAP canister purge control
91 Front oxygen sensor
95 Crankshaft sensor
98 Coolant temperature sensor
101 Camshaft sensor
103 Park/neutral switch
105 EGR and canister control valve
108 EVAP volume control
*PO Scan Tool codes below*
0505 No self diagnostic codes present
0101 Camshaft position sensor
0102 Mass airflow sensor/circuit
0103 Coolant temperature sensor
0104 Vehicle speed sensor
0111 EVAP purge flow monitoring system
0114 Fuel system rich
0115 Fuel system lean
0201 Ignition signal
0203 Closed throttle switch
0205 IACV/AAC valve
0208 Overheating
0213 EVAP system
0214 Purge volume control valve
0301 ECM control unit
0302 EGR function
0303 Front heated oxygen sensor malfunction
0304 Knock sensor
0305 Exhaust gas temperature sensor
0306 EGRC BPT valve
0307 Closed loop operation
0309 Vent control valve
0311 Vacuum cut valve bypass valve
0312 EVAP system purge control valve
0401 Intake air temperature sensor
0402 Fuel temperature sensor or circuit
0403 Throttle position sensor
0409 Front oxygen sensor
0410 Front oxygen sensor
0411 Front oxygen sensor
0412 Front oxygen sensor
0503 Front oxygen sensor
0510 Rear oxygen sensor
0511 Rear oxygen sensor
0512 Rear oxygen sensor
0514 EGR system
0605 Cylinder 4 misfire
0606 Cylinder 3 misfire
0607 Cylinder 2 misfire
0608 Cylinder 1 misfire
0701 Multiple cylinder misfire
0702 Catalytic converter
0704 EVAP system
0705 EVAP system
0706 Fuel injection system malfunction
0707 Rear oxygen sensor
0801 Vacuum cut valve bypass valve or circuit
0802 Crankshaft sensor
0803 Absolute pressure sensor
0804 A/T diagnosis comm line
0807 EVAP canister purge control
0901 Front oxygen sensor heater
0902 Rear oxygen sensor heater
0903 Vent control valve
0905 Crankshaft position sensor
0908 Coolant temperature sensor
1003 Park/neutral switch
1005 EGR solenoid valve circuit
1008 EVAP system
1101 Inhibitor switch
1102 A/T vehicle speed sensor
1103 A/T first signal
1104 A/T second signal
1105 A/T third signal
1106 A/T fourth signal
1107 A/T torque converter clutch
1108 Shift solenoid A
1201 Shift solenoid B
1203 Overrun clutch solenoid
1204 TCC solenoid
1205 Line pressure solenoid
1206 TPS for A/T
1207 Speed signal A/T
1208 A/T fluid temperature sensor
1302 MAP/BAR switch solenoid valve or circuit
1305 Fuel pump control module or circuit
1308 Cooling fan
#3
Posted 17 April 2008 - 05:39 AM
![](http://www.mestiso.net/forums/public/style_images/Carbon_orange/post_offline.png)
![ohmy.gif](style_emoticons/default/ohmy.gif)
02 Toyota Celica GT (dead)
91 Honda CRX LS V-tec (will be missed)
H1Racing.com
91 Honda CRX LS V-tec (will be missed)
H1Racing.com
#4
Posted 17 April 2008 - 09:09 AM
![](http://www.mestiso.net/forums/public/style_images/Carbon_orange/post_offline.png)
QUOTE (RicerX @ Apr 17 2008, 06:39 AM) <{POST_SNAPBACK}>
![ohmy.gif](style_emoticons/default/ohmy.gif)
haha. if you think thats a long list.................................................................
You should see the really crazy long ones.
Andrew
#5
Posted 22 April 2008 - 10:06 PM
![](http://www.mestiso.net/forums/public/style_images/Carbon_orange/post_offline.png)
![ohmy.gif](style_emoticons/default/ohmy.gif)
14 Vehicle Speed Sensor signal circuit is open
75 EVAP leak
77 Rear oxygen sensor
1201 Shift solenoid B
93 - ?
77 Sounds expensive and a pain to boot. 1201, will I even have to worry if I am converting to manual?
#6
Posted 23 April 2008 - 04:21 PM
![](http://www.mestiso.net/forums/public/style_images/Carbon_orange/post_offline.png)
Since the car is 96 it's OBDII and all the check engine codes must be clear in order to pass smog. So the shift solenoid has to be fixed since the car has to be plugged into the smog machine. Altho if we do a 5 speed and use a 5 speed ECU then it will work but I dunno when you plan to do the swap and I know that you need to get the car smogged soon.
THe speed sensor shouldnt be too hard to fix it's either the wires or the sensor itself, EVAP could be a few things but again not too bad and the O2 sensor should be the same fix as the speed sensor.
THe speed sensor shouldnt be too hard to fix it's either the wires or the sensor itself, EVAP could be a few things but again not too bad and the O2 sensor should be the same fix as the speed sensor.
#7
Posted 23 April 2008 - 09:36 PM
![](http://www.mestiso.net/forums/public/style_images/Carbon_orange/post_offline.png)
Apparently a tranny has been sourced up, but I'll need a new ecu huh? I also need to go to pick in pull and get:
slave cylinder
hard lines
drive shaft
flywheel
clutch
etc
etc
etc
Think the best place to get the sensors would be from nissan or donor?
slave cylinder
hard lines
drive shaft
flywheel
clutch
etc
etc
etc
Think the best place to get the sensors would be from nissan or donor?
#8
Posted 23 April 2008 - 10:09 PM
![](http://www.mestiso.net/forums/public/style_images/Carbon_orange/post_offline.png)
THe O2 you should be able to get a Bosch one from Kragen or other autoparts places for a decent price. I have an S14 SR speed sensor if you want to try it you're welcome to it, I dunno if it will read the right speed tho but it's worth a try. The clutch kit I would get on eBay from the user "gripforce-clutches" it was like $100 for an OEM kit (pressure plate, clutch disc, pilot bushing & throw out bearing) all you would need to get is a flywheel and a throw out bearing carrier which I may have one in my garage you can have. The rest would for sure be from the yard or a part out. The clutch master and slave cylinder's try kragen or other autoparts places they are like $10 each for new unit's
#9
Posted 01 May 2008 - 11:39 AM
![](http://www.mestiso.net/forums/public/style_images/Carbon_orange/post_offline.png)
If your back down @ jons I can bring my obdII scanner and see if it'll interface to grab P-codes. It may even tell me if the o2 sensor is responding or not.
I'm sure rob knows where we can D/L the FSM. If not I can find it.
Andrew
I'm sure rob knows where we can D/L the FSM. If not I can find it.
Andrew
#10
Posted 04 May 2008 - 09:52 PM
![](http://www.mestiso.net/forums/public/style_images/Carbon_orange/post_offline.png)
With any luck I'll be over at Jon's on thursday. Ideally, I'd like to get it plugged in to see how everything is performing.
1 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
-
Facebook (1)