Jump to content

Welcome to SDR Garage Forums
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Photo

Mestizo's 92 Nissan 240SX Coupe Build Thread


  • Please log in to reply
527 replies to this topic

#1
mestizo

mestizo

    Administrator

  • Admin
  • PipPip
  • 1456 posts

Ok so I broke down and decided that I wanna return to my roots of going sideways... since 10 years of my life I raced quads and that yearning has never really left me. So after a couple of months of pondering I decided that I wanted to do this and sell my current projects so I can get back to being sideways. With that being said I looked for a couple of weeks and found this car in November 2006 on craigslist for $500. There were a few things wrong with it but nothing that I couldnt fix, it had a dent in the drivers headlight area, a large dent in the passenger rear quarter panel and an overheating issue from a neglected cooling system. Well needless to say that 95% of those problems are gone and I have had that car about 3 weeks now. Anyways here is the progress of the car since i got it, along with some pics too. I will be documenting all the progress and taking more pictures along the way biggrin.gif
 

 

Car Sold 10-11-2020
*** Current Specs as of 11/1/2016 ***


Car:
1992 Nissan 240SX SE Coupe

Car name:
Layla

Engine, Transmission & Drive Train:
Stock 2005 Pontiac GTO LS2 M6 swap
Custom motor/tranny mounts by Stealth Custom Fab
Hooker LS V8 into S chassis swap headers
Spintech 4" oval exhaust tubing and 4" oval muffler
Custom driveshaft by Driveline Service of West Sacramento
Griffin radiator with custom inlets by Stealth Custom Fab
Weld Locd version 3 welded rear diff
98-2004 Corvette fuel filter/regulator
B&M 70266 oil cooler core with Russell -10AN lines/fittings (enging oil)
B&M 70266 oil cooler core with Russell -6AN lines/fittings (power steering)
Catchcans.com Closed Loop PCV Catch Can


Electrical:
Odyssey PC680 battery
STRI DSD-SLM 60mm Oil Pressure, Oil Temp, and Water Temp gauges in a custom cluster
Sun Automotive Hyper ground kit
Entire car wiring gutted and rewired down to only the essentials by me
Stock wiring harness reworked by me
Stock GTO ECU tuned by PCM of NC
Pico Wiring 5575PT 350Amp cutoff switch
Blue Sea 5026 Fuse Block
Blue Sea Contura Marine grade switches
FAL Variable fan speed controller
1995 Nissan Altima Electric Fans
Walbro 255LPH HP fuel pump
Rebased Lexus/Phillips HID kit
LED rear signal and tail light bulbs


Exterior:
AIT Kouki S14 Conversion front fenders

Extreme Dimensions D1 vented hood and V-speed 2 front bumper

B Magic D1 Series side skirts and rear bumper (Vertex knock off)

Aftermarket Kouki S14 clear headlights and corner lights

Aftermarket Origin style Red/Clear tail lights

Dmax trunk wing

Origin rear window spoiler


Interior:
Modified driver's side floor pan with custom seat bracket to get the seat as low as possible.
Bride MO Passenger seat rail
Corbeau Forza II seat driver side (wide version cuz im a fat ass)
Recaro SRD seat passenger side
Momo Hub
Momo Mod 8 steering wheel
NRG Version 3 Slim quick release (FET Copy)

Corbeau SFI 5 point harnesses
Custom full roll cage by Stealth Custom Fab (Main Hoop bent by Blu808), using 1.5" .120 wall DOM tubing


Brakes:
• Front:
1990 Infiniti Q45 front brake calipers
Brembo Q45 X Drilled/Sloted front rotors
PBR XBR pads

• Rear:
Stock rear calipers
Brembo X Drilled/Sloted rear 4 lug rotors redrilled to 5x114.3
PBR ULT pads

• E Brake:
Wilwood DynaPro dual piston calipers and pads

• Lines:
Russell lines front
Circuit Sports lines rear
Earl's -3an lines E brake


Suspension & Steering:
Feal 441 Coilovers 8k front and 6k rear spring rate
Stitch welded engine bay by Jonnie Fraz of Stealth Cutsom Fab

• Front:
Stock S13 Hicas front steering rack swap (quicker ratio than non Hicas)
Aluminum steering column bushing
Cor Integration modified steering knuckles, roll center corrected
Battle Version weld on FLCA adjusters
Stealth Custom Fab fender braces
Cor Integration tension rods
SPL V5 pro outer tie rod ends
Ikeya Formula inner tie rods
Stealth Custom Fab prototype front strut bar
Stealth Custom Fab welded front tension rod brace.

• Rear:
Stealth Custom Fab solid subframe bushings
Stealth Custom Fab RUCA's

Stealth Custom Fab RLCA's
White Line adjustable rear sway bar
Battle Version rear traction rods
SPL - Nagisa V2 Rear toe arms
Powered By Max rear knuckles, spherical bearings, roll center corrected and dual caliper mounts.


Wheels and Tires:
S5 / Ichiba Bolt on 5 lug conversion
Enkei RPF1 17x10 +18 wheels
Front tires Federal 595 RS-R 235/40
Rear tires Federal 595 SS 255/40


Current Sponsors:
Stealth Custom Fab - Stealth-Custom-Fab.com
Endless Autobody


Alignment Specs:
• Front:
-4 degrees camber
stock caster
1mm toe out

• Rear:
0 camber
1mm toe in


Fluids:
Amsoil Dominator 10w30 engine oil
Amzoil ATF (trans)
Redline Power Steering Fluid
Distilled Water plus Redline Water Wetter
Motul 90PA gear oil (differential)


----------------------------------------------------------------------------------------
11/6/2006
Picked up car from Yuba City for $500 Clean Title and Drove it straight home. Here are the pics from the craigslist ad.
cvyb134lgi3xybmkhuhswywa2xtq.jpg

gioowixnn1ga9bjxfniirnnn0fd0.jpg

Here are the pics I took of it the night I drove it home, these show the various dents that it had.
cimg1513.jpg

cimg1516.jpg

cimg1514.jpg

cimg1515.jpg

cimg1518.jpg

cimg1517.jpg

11/7/2006
Registered/payed tax on the car at the DMV. Removed all rear interior parts from car, cleaned the interior of all the stank smoke ashes and dirt. Checked tire pressure and ordered up a factory thermostat. Picked up a set of black seat covers to cover the stank seats that were in the car as well as a leather steering wheel wrap. Washed trunk floor of oil and debris, pressured washed floor mats and washed entire car.
cimg1551.jpg

cimg1552.jpg

cimg1547.jpg

11/8/2006
Pulled the ecu and checked codes, fixed the EGR vacuum leak, fixed the power steering bolt, topped off brake fluid, bought a brand new battery hold down to fix the non existent one I had and changed the air filter.

11/9/2006
Popped large dent out on passenger quarter panel, pushed out small dent on the rear taillight area, checked/replaced all fuses, removed 80% of the faded/bubbled tint, removed fan shroud, fan/fan clutch, removed all belts, pulled thermostat and water pump.
cimg1548.jpg

cimg1546.jpg

11/10/2006
Diagnosed parking light problem, removed extra wires from under the dash, flushed engine block and radiator of rust. Replaced water pump, thermostat, alt/power steering belts and radiator hoses. Found coolant leak in the thermostat bypass coolant line.

11/12/2006
Removed coolant bypass hose. Replaced with a similar hose from Kragen.

11/22/2006
Fixed dent with front headlight and core support. Here are some pics when we were using the come along to pull the core support back out and putting in the new head light bucket. The first pic is the passenger side and what the core support should look like. The light is good enough for now I could make it look better but i really dont need to since I am getting a Silvia front end.
cimg1542.jpg

cimg1541.jpg

cimg1543.jpg

cimg1549.jpg

cimg1550.jpg

11/24/2006
Pulled the stock diff and had my dad weld it, filled with new gear oil. 1st DRIFT Happened this night!

11/26/2006
Changed engine oil to mobil1 synthetic and replaced oil filter. Purchased KTS Coilover’s from SPL.


Next update will be the installation of my KTS Coilovers which will be here this friday! emthup.gif



#2
RicerX

RicerX

    Member

  • Members
  • PipPip
  • 363 posts
  • Gender:Male
  • Location:Las Vegas, Nevada
  • Interests:Cars and Girls
Hey, I have a dent in the same place. I hope everything wotks out for you cuz its not for me.
02 Toyota Celica GT (dead)
91 Honda CRX LS V-tec (will be missed)
H1Racing.com

#3
mestizo

mestizo

    Administrator

  • Admin
  • PipPip
  • 1456 posts
QUOTE (RicerX @ Nov 28 2006, 07:34 PM)
Hey, I have a dent in the same place. I hope everything wotks out for you cuz its not for me.


Thats sucks bro, i kno the feeling well tho, that's kinda why i got this car was so I could go play on the weekends again. It would have taken me a couple more years to finish my hatch, so I decided that I needed to have fun now. Hence the decision to sell my Hatchback and all it's parts was made. Altho i will tell u it was not easy to come to this decision and I did feel some pains towards abandoning my project that I have worked so hard on for the past 3 years. But luckily my girl and my freinds have been there to support me console.gif

#4
RicerX

RicerX

    Member

  • Members
  • PipPip
  • 363 posts
  • Gender:Male
  • Location:Las Vegas, Nevada
  • Interests:Cars and Girls
I just wish I had tons of money, I got some new problems that ima show you guys a lil later. Aside from that, I just got a $2,000 ticket which really sucks. It REALLY sucks not having a police scanner.
02 Toyota Celica GT (dead)
91 Honda CRX LS V-tec (will be missed)
H1Racing.com

#5
mestizo

mestizo

    Administrator

  • Admin
  • PipPip
  • 1456 posts
QUOTE (RicerX @ Nov 29 2006, 06:34 PM)
I just wish I had tons of money, I got some new problems that ima show you guys a lil later. Aside from that, I just got a $2,000 ticket which really sucks. It REALLY sucks not having a police scanner.


Amen I wish I tons of money too bro, lol I know tickets very well myself. I think in my life I have prolly paid in the tens of thousands to the Sacramento County Courts, just sign up for payments and drive cool for a while thats what I always had to do. Also I have always had radar dectectors and freinds have had police scanners, they dont always give you a warning however it is better than nothing at all.

#6
RicerX

RicerX

    Member

  • Members
  • PipPip
  • 363 posts
  • Gender:Male
  • Location:Las Vegas, Nevada
  • Interests:Cars and Girls
QUOTE (mestizo @ Nov 30 2006, 12:14 AM)
Amen I wish I tons of money too bro, lol I know tickets very well myself. I think in my life I have prolly paid in the tens of thousands to the Sacramento County Courts, just sign up for payments and drive cool for a while thats what I always had to do. Also I have always had radar dectectors and freinds have had police scanners, they dont always give you a warning however it is better than nothing at all.

Yea, since my girl works at best buy, ima try to get the best scanner they got. He busted me for my turn signals. I haven't had a cop mention them to me until this pig. He also got me for my exhaust, and he didn't put a meter to it. I give him some respect cuz he didnt suspend my license or tow my car. Oops, sorry, I think this would go under a different blog. I don't mean to take away from your thunder. bow.gif
02 Toyota Celica GT (dead)
91 Honda CRX LS V-tec (will be missed)
H1Racing.com

#7
mestizo

mestizo

    Administrator

  • Admin
  • PipPip
  • 1456 posts
LOL its cool man... Back on topic tho I got some more work done tonight in preparation for my coilovers which should be delivered tomorrow. I thought that removing the stock suspension would prolly take me a couple of hours considering that I have never done a nissan before and the fact that I thought most of the bolts would be rusty or stuck, but it took all of 30 minutes for my dad and I pull the suspension, to be honest I think even without his help it would have still been 30 minutes. The 240 suspension is much easier to work on than my honda's, i just wish the engine bay was easy like honda. Anyways I didnt take as many pics as I should have so most of this is after everything was already out of the car.

Up on 4 jack stands


Front spring/shock removed


Rear spring/shock removed


Here are the stock springs/shocks out of the car




#8
mestizo

mestizo

    Administrator

  • Admin
  • PipPip
  • 1456 posts
Lunch break update, MY KTS'S ARE HERE!!!!!!!!!!!!!! emthup.gif

#9
mestizo

mestizo

    Administrator

  • Admin
  • PipPip
  • 1456 posts
Ok I got my coilover's installed, man it was so easy! Only really hard part was doing the hieght adjusment cuz u gotta jack the car back up and remove the bolts then turn the lower adjuster till u get it right luckily i only had to do this once on the front and rears were perfect! I don't have any pics of the full car just shots of the install. However I will tell u this my car is super fucking stiff and kicks the ass sideways so easy now!!!! emthup.gif

UPS brings goodness!




It's like Christmas morning!!! All unwrapped.




Front Upper Camber Plate


Front coilover installed


Rear Coilover


Rear Adjuster from inside the trunk


#10
mestizo

mestizo

    Administrator

  • Admin
  • PipPip
  • 1456 posts
Well I went out to pick and pull today to look for some odd and ends that my car was missing, I went off a lil back road and had my first real chance to drift the car and man what a difference those coilovers made!!! The car is real predictable and corrects really nice, the ass goes side ways much easier. I have not had much time to play but from the lil the i did it's great for me at this point.

A few things I forgot to mention yesterday was I found out my front passnger side brake caliper is leaking and my rear pads are shot, so I had andrew order up some factory rear pads and im gonna go pick a rebuilt caliper soon too. Ill try to take to pics of the whole car later.

#11
mestizo

mestizo

    Administrator

  • Admin
  • PipPip
  • 1456 posts
Well time for an update, had a good sunday at pick n pull getting parts for my car, picked up a set of manual transmission pedals, clutch master cylinder, clutch hard line and a driver's front side fender.

Altho sunday was not a good day for all of us. Andrew a.k.a. ASSASSIN10000 on here was in an accident, a large cuiser motorcycle going at a high speed hit his AE86 on the passenger side late sunday evening. The car is totaled and man did that bike cause some seriuos damage, the people on the bike were alive when Andrew last saw them in the ambulance however no other info is known at this time about them. Andrew is ok other than some soreness and bruising, but his car however sadly is gone, the front end seems to be in ok condition but pretty much everything from the doors back is damaged. I'm just glad Andrew wasnt hurt badly. noexpression.gif

Monday was not much better for me, my motor in my daily driver decided it wanted to start rod knocking so it's rebuild time for it, this is an unexpected $700 expense for me. So Xmas will suck this year.

Today I got paid... decided that I had enough bad news for the past 2 days and spent some money. I bought a set of Bride MO seat rails so I can put my Recaro's in the 240 and also picked a set of mint JDM Silvia Brick Head Lights for when I do the Silvia front end conversion.

So yea that's all for now, sorry for the lack of enthusiasm just a lot going on with one of my best freinds has a bad accident, my motor goes out and o yea I forgot to tell u i got a ticket for no front plate on my girls car today too

#12
RicerX

RicerX

    Member

  • Members
  • PipPip
  • 363 posts
  • Gender:Male
  • Location:Las Vegas, Nevada
  • Interests:Cars and Girls
Ooo. That suks. In a way, its kinda wierd cuz whats happening to you, im goin thrue right now. My friend totaled his civic, rear ended a diesel. Aside from that, it sounds like im getting piston slap again. Difference, no money to fix anything. I hope assassin1000 gets his car runnin, and those people are ok. Its sometimes good to have 2 cars.
02 Toyota Celica GT (dead)
91 Honda CRX LS V-tec (will be missed)
H1Racing.com

#13
mestizo

mestizo

    Administrator

  • Admin
  • PipPip
  • 1456 posts
Yea there is no fixin his car, but he is prolly getting a great deal on a shell that we can transfer all the parts that are still in good condition to.

#14
RicerX

RicerX

    Member

  • Members
  • PipPip
  • 363 posts
  • Gender:Male
  • Location:Las Vegas, Nevada
  • Interests:Cars and Girls
QUOTE (mestizo @ Dec 6 2006, 10:57 AM)
Yea there is no fixin his car, but he is prolly getting a great deal on a shell that we can transfer all the parts that are still in good condition to.

Oh yea, that sounds good. He'll be up and running in no time.
Hey, is every one else on vacation or something?
02 Toyota Celica GT (dead)
91 Honda CRX LS V-tec (will be missed)
H1Racing.com

#15
mestizo

mestizo

    Administrator

  • Admin
  • PipPip
  • 1456 posts
QUOTE (RicerX @ Dec 7 2006, 08:09 PM)
Oh yea, that sounds good. He'll be up and running in no time.
Hey, is every one else on vacation or something?


lol no they just dont post, sucks cuz i wanted there to a decent amount of traffic thru the board but i guess there is nothing of value to the rest. Andrew is still recovering from the accident so I dont think he will post for a while but the others really have no excuse.

#16
RicerX

RicerX

    Member

  • Members
  • PipPip
  • 363 posts
  • Gender:Male
  • Location:Las Vegas, Nevada
  • Interests:Cars and Girls
Well, My wishes go out to Assassin, hurry and recover so you can post, and I cant wait to see the rest of the 240. Kinda excited cuz its also a learning experience. Sham on everyone else chair.gif
02 Toyota Celica GT (dead)
91 Honda CRX LS V-tec (will be missed)
H1Racing.com

#17
mestizo

mestizo

    Administrator

  • Admin
  • PipPip
  • 1456 posts
Well I got a lot of work done on the 240 yesterday, on friday night I went out to drift. Went out to a known spot and started to drift, when my car starts to overheat, so I figured I would drift a couple more mins and go to the gas station to check it. Well when I get to the gas station i fond out my engine is covered in coolant, the heater hoses pretty much decided they had enough and blew. So that cut my night short.

Anyways yesterday I decided to change all the heater hoses so that I could drive the car still. I knew it was going to be hard to replace them since nissan decided to run the heater hoses thru the middle of the 2 piece intake manifold. Man it was so much more work than I wanted to do but it had to be done. So in end what I did was remove the intake manifold entirely and then go to Kragen to find hoses that were pre-bent to fit the 11 hoses that are in between the intake. Also picked up new manifold gaskets too. I started at 3pm and finished at 10pm.

WOOOHOOO it was woth it tho cuz the car only overheats after like 10 - 15 mins of drifting, this is without the stock fan/fan clutch which I removed cuz I will be getting an electric fan later. But man I learned a lot last night!!!!!! Only downside is my power steering started to leak like crazy so I got to fix it again. Also while I was looking for spot to drift I met a guy that was drifting who has 2 manual trannies he is selling, he said he would sell me one for $100, yea doggy 5 speed time! Anyways enough with this novel I am writing... here are some pics of the manifold project.

Here is the lower piece of the manifold I just set it on the rad support so as not to remove the 5 vacuum lines going to the front of it, you can't see it but I removed the A/C line from behind the engine and the cruise control actuator.


This is the upper manifold


Here u can see the block and all the rust stains from the leaking hoses the car used to have before i owned it


I took this pic to show that I had this dam thing in peices. I had to take the hood off cuz it doesnt raise high enough to really work on it


Reassemblly of the lower/upper manifold along with new hoses, this is where it got tricky to hook up the 6 vacuum lines on the back of the manifold as u put it back together without knocking them off as u tighten all the bolts that hold it on.



#18
mestizo

mestizo

    Administrator

  • Admin
  • PipPip
  • 1456 posts
Ok just a quick up date before the weekend begins. I sold my CP pistons, so I order up a bunch more stuff with the money. Brand New Nissan Silvia S13 head light brackets, Brand New Silvia Corner Lights and Intense Power GT-Racing 3" Stainless Steel Cat-back Exhaust. Can't wait to get all this stuff. My Bride MO rails should be here tomorrow, so it's Recaro time baby!

I had some issue's with power steering lines, as I said before last saturday I found out my power steering line was leaking, so I went to Napa and picked a new lifetime warranty line. The problem is when I got it home my power steering pressure sensor wouldnt thread into it cuz the new line had the wrong thread pitch. So back to Napa it went, I ended finding out all of the Napa line's have the wrong thread pitch, these must be for a different sensor or something. Anyways I went to Kragen's, got one that worked and popped it in Monday night. So I am ready to go now.

Tuesday I took the car to the pressure wash place down the street... washed the engine and underhood, man what a difference that made. Plus this will make it easier to track down leaks if they develop now that the engine is shiny and clean.

#19
assassin10000

assassin10000

    GTS Diff abuser!!!

  • Gods of Mestiso.net
  • PipPip
  • 535 posts
QUOTE (mestizo @ Dec 15 2006, 08:37 AM)
I had some issue's with power steering lines, as I said before last saturday I found out my power steering line was leaking, so I went to Napa and picked a new lifetime warranty line. The problem is when I got it home my power steering pressure sensor wouldnt thread into it cuz the new line had the wrong thread pitch. So back to Napa it went, I ended finding out all of the Napa line's have the wrong thread pitch, these must be for a different sensor or something. Anyways I went to Kragen's, got one that worked and popped it in Monday night. So I am ready to go now.

Tuesday I took the car to the pressure wash place down the street... washed the engine and underhood, man what a difference that made. Plus this will make it easier to track down leaks if they develop now that the engine is shiny and clean.


Sweet, glad it fits (and they had it in stock). Does that rubber bushing/bracket thing at the bottom fit?

Andrew

#20
mestizo

mestizo

    Administrator

  • Admin
  • PipPip
  • 1456 posts
QUOTE (assassin10000 @ Dec 15 2006, 11:18 AM)
Sweet, glad it fits (and they had it in stock). Does that rubber bushing/bracket thing at the bottom fit?

Andrew


Yes its a lil off but it fits better than the Napa one i had and my rails are here!!!!!!! emthup.gif




11 user(s) are reading this topic

0 members, 10 guests, 0 anonymous users


    Bing (1)