Got all my Kouki stuff mounted up this morning. Oddly enough I woke up at 10am. So I went straight to work Heres pics and explanations
I forgot to take pics here but I drilled out the holes for the Kouki Wing and Got it all fitted. I need to fiberglass the crack on it then I will paint it but for now its just red since the car doesn't move. Heres a clear picture first of the wing and skirts though.
Wing
I drilled out the plastic things on the bottom of the fender to mount up the front of the skirt
I used then a bolt out of my bucket of bolts to screw it in I used the same kind of bolt for both sides haha
Then I grabbed 4 of these to mount up the back and middle of the skirt (only 2 pictured cause other 2 were on the other side.)
I lifted the skirt and scratched out where I needed to drill. It may be hard to see
Drilled it out with 3/16 I beleive.
Then Skirt lifted back up lined up nicely
Bolted Down
Then drilled out next whole to hold up the middle section better.
That bolted down
Finished Product Gangster
And I got new plugs haha