Got all my Kouki stuff mounted up this morning. Oddly enough I woke up at 10am. So I went straight to work Heres pics and explanations

I forgot to take pics here but I drilled out the holes for the Kouki Wing and Got it all fitted. I need to fiberglass the crack on it then I will paint it but for now its just red since the car doesn't move. Heres a clear picture first of the wing and skirts though.

Wing


I drilled out the plastic things on the bottom of the fender to mount up the front of the skirt

I used then a bolt out of my bucket of bolts to screw it in I used the same kind of bolt for both sides haha

Then I grabbed 4 of these to mount up the back and middle of the skirt (only 2 pictured cause other 2 were on the other side.)

I lifted the skirt and scratched out where I needed to drill. It may be hard to see

Drilled it out with 3/16 I beleive.

Then Skirt lifted back up lined up nicely


Bolted Down

Then drilled out next whole to hold up the middle section better.

That bolted down

Finished Product Gangster



And I got new plugs haha